Is your Dlink extender blinking orange light? This might be due to the firmware fault or some other minor issues on your D-link wifi extender. If you see your D-Link wifi extender flashing orange light, don’t worry! This is literally quite common, not only with the D-Link extender, but also with some other brands or models of extenders on the market.
Although the D’Link wifi extender flashing orange light can be a little annoying, it is important that you fix the issue at the earliest. You don’t always have to call or get in touch with a professional technician until things get worst. You can fix the issue on your own by performing suitable troubleshooting steps.
This post will guide you on how to fix the Dlink extender blinking orange issue on your own. Let’s get started right away!
Fix D-link Wifi Extender Flashing Orange Issue
In this section, we will discuss how to go about the fix of this issue on your own. You just have to follow the steps very carefully in order to avoid any issues or errors. Follow the steps below:
1. Reboot
- First of all, reboot your D-link wifi range extender.
- Unplug the extender from the power outlet and plug it back into the outlet after a few minutes.
- Let the device come back to its normal state.
2. D-Link firmware update
- If you see your D’Link wifi extender flashing orange, it means either the firmware is outdated or corrupted.
- So the next step is all about updating the firmware of your D-Link wifi range extender.
- Firstly, download the appropriate firmware from the D-Link firmware download website.
- After that, login to the D-Link extender with the help web browser.
- Open a web browser and type http://dlinkap.local or 192.168.0.1.
- Enter the default username and password, and click the Login button.
- Navigate to the Firmware Upgrade page and follow the on-screen instructions to update the D-link extender firmware.
- At last, cross-check whether the Dlink extender blinking orange issue persists. If yes, move to the next step.
3. Reset D-Link extender
- If the firmware update could not resolve the D-Link wifi extender flashing orange issue, you need to restore the default settings on your device.
- Locate the reset button on the frame of your extender.
- Press the reset button with the help of a sharp object, such as a toothpick or a paperclip.
- Hold down the reset button for about 10 seconds.
- Once you release the button, let your extender restore the factory default settings.
- It will take your device a few minutes to get back to the original settings.
NOTE – Once your D-Link extender reset to the factory defaults, make sure you reconfigure your device. Login to the D-link extender and configure its settings with your router’s network. After that, the issue will go-off.
Bottom line
To reconfigure your D-Link wifi extender, login through the dlinkap.local web address and follow the on-screen instructions to set up your extender. Make sure you do not jump over to the reset step. Resetting your device should be the last option to fix the Dlink extender blinking orange issue. Most of the time, the issue gets wiped off after the firmware update on your device.
So this post was all about the D-Link wifi extender flashing orange issue. We hope you got to learn how to fix the D’Link wifi extender flashing orange issue in just three easy steps. If you face any issues with your extender or the network itself, please feel free to reach out to our support team for further assistance.
