D-Link Extender Login

To get access to the D-Link Extender Login page, you need the web address of the device, username, and login password. Dlinkap.local is a web link where you can access the D-Link Extender Login and setup page of the extender. This is the main page where you can save the device as well as network settings. You can find the default information about dlink extender on the user manual. But if you don’t have a user manual or you don’t want to read the entire manual, you can also find the entire information on the page as well. Before accessing the dlink extender setup page, you need to make sure that the dlink extender is connected with your computer.

D-Link Extender Login IP Address, Username, And Password

To login to dlink extender, you require a default web address or IP address, username, and default login password.

The default web address for dlink extender is http://dlinkap.local.
Default IP address for dlink device is 192.16.50.0.
The Dlink login username is admin.
The password field is required to be left blank for admin access.

Dlinkap.local redirects a user to the 192.168.50.0 IP address. 192.168.50.0 is an IP address that is used to configure, login, or setup dlink extender. Moreover, when a user enters http://dlinkap.local or 192.168.50.0 into the web browser, he will get see the d-link extender login page appear online.

Login Guide For D-Link Extender

First, connect the dlink extender to your computer or Smartphone wirelessly or via an Ethernet cable.
Second, open up a browser such as Chrome, Firefox, or Safari and type http://dlinkap.local in the address bar.
Third, you will see two fields where you need to type the dlink login username and password for your dlink device.
Next, enter admin in the username field and leave the password field blank on the dlinkap.local login window.
Finally, click ‘Enter’ and you will see the dlink extender setup wizard .

When you try to open the dlinkap.local login page, you see an error displaying on the screen saying ‘the web page cannot be opened’ or ‘cannot reach to the web page’. The question that comes to our mind is why i cannot access the dlinkap.local login page. To help you out with the same, we are here. If you are unable to log into dlink extender, there are various reasons behind it, such as:

The issue with the default SSID and Passkey
Problem with the configuration of the host router
A web browser isn’t compatible
Incorrect login username and password combination
Issues with the firewall settings on the computer1

Steps To Fix Dlinkap.Local Login Not Working

In order to fix the dlinkap.local login not working error, you should try out the following steps.

Connect your computer or smartphone to the router network, either using a wired connection or a wireless one.
Use 192.168.50.0 if dlinkap.local web address is not responding.
Connect your dlink device to the power source and make sure it has an adequate power supply.
Disable the firewall settings on your computer.
Use the updated version of a compatible web browser to access the dlink extender login page.
Make sure that the firmware of the dlink device is up to date.

D-Link Extender Setup With Dlinkap.Local Login Page

If you are familiar with the dlinkap.local login page, then you must know you can easily configure and set up dlink device using this web link. To configure the device, go to the dlink extender login page by typing the web address into the browser and extend the wireless network. You can go through the instructions mentioned below to set up your dlink device:

First, navigate to the dlinkap.local login page by using the updated web browser of your choice on the connected device.
This will open the dlink extender login page. If the login window fails to open, you can use the default IP address 192.168.50.0.
Second, enter the login username and password for your dlink device and hit the ‘enter key. You will get into dlink extender setup wizard.
Now, click on ‘Scan now’ to find the available wireless networks. Select your home router by identifying its SSID. If it is secured enabled, you need to enter its security key.
Now, you can configure the wireless settings of the extended network. Customize the SSID and Passkey of the extended network.
Finally, after making all the changes, hit on the ‘Save’ button to apply the changes.

Cannot Get Access To The DLink Extender Login Page?

If you are unable to access 192.168.50.0 or dlinkap.local login page, all you need to do is to reset the extender. This can be done by pressing the reset button on the back of the router for approximately 20 seconds. You may use a tooth stick to press the button and then you will get your dlink extender back to its default settings. What you need to keep in mind is that when you do a reset process on your device, it restores all the default settings. Hope this page helped you with dlink login using the web domain www.dlinkap.local. To know more, simply call our technical experts on 24/7 live number. Our team is available round the clock to give you assistance all the time.