The D-Link WiFi extender is an excellent networking device with great network coverage. After accurately setting up this extender, you can eliminate the dead zones in your house. That’s why it’s crucial to set up the extender correctly. However, when you are facing the D-Link extender dropping connection issue, it can be exasperating. This issue can occur due to several reasons. If you have tried to fix the extender but the glitch is persisting, you must figure it out and troubleshoot it effectively.
If you are facing the D-link extender keeps dropping connection issues as well, don’t worry. Today, we’ll talk about the reasons why the D-Link extender drops connection. Moreover, we’ll discuss the ways you can use to troubleshoot the issue.
Why is D-Link Extender Keeps Dropping Connection Frequently?
There are several factors responsible for why the D-Link extender disconnecting from the internet. Some common are as follows:
- Insufficient power supply
- Router is too far from the extender
- Outdated firmware
- Internal issues with the router
- Technical issues with the extender
These are some common reasons for the D-Link extender dropping connection. Further, we will go over the methods you can use to fix the issue.
Solved: D-Link Extender Disconnecting Frequently
It’s imperative to figure out the reason behind the issue to resolve it effectively. Now that we know the factors responsible for it, let’s discuss the methods. These troubleshooting ways are as follows:
Inspect the Power Source
You can start by inspecting the power source of the extender. The D-Link extender requires a stable WiFi connection to function effectively. Without a sufficient power source, you can face the Dlink extender keeps dropping connection. Therefore, ensure to plug the extender into a stable power source. Check the current source, if that doesn’t work properly, you must plug it into another electrical outlet. Also, if there’s a power outage, it will stop working temporarily.
Check the Router and Extender’s Connection
For the extender to work efficiently, the router and the extender should have a proper connection. If the connection between both devices breaks, the D-Link extender disconnecting issue will persist. Therefore, ensure to set up the extender accurately. You can set up the extender using the WPS button within a few minutes.
Restart the Extender
You can also try restarting the extender to fix any minor glitch or bug within the extender. All you need to do is power OFF and unplug the extender for some time. Give the extender some time to cool down. After 30 or so seconds, you can power it back ON and the problem with the extender should be gone. This should eliminate the D-Link extender drops connection issue.
Move the Extender Closer to the Router
One of the most common reasons for the D-Link extender dropping connection issue is the distance between the router and the extender. After the setup, you can relocate the extender, but ensure to place the extender inside the router’s range. If you place the extender too from the router, the connection will break and the extender will not work effectively. Ensure to place both devices in an open area.
Check the Router
The D-link extender keeps dropping connection issues could also occur due to a glitch with the router. Ensure the connection between the router and the modem is proper. Check the Ethernet cable. If there’s an issue with it you might need to replace it. If that isn’t the case, you can try power cycling it, upgrading the firmware, and resetting it to eliminate any internal glitches. Fixing the router should eliminate the D-Link extender disconnecting problem.
Upgrade the Firmware
You can also try upgrading the firmware of the extender to resolve any issues. That’s why, it’s imperative to upgrade the firmware of the extender every once in a while. Upgrading the firmware of the extender eliminates all the glitches and bugs with the extender. To upgrade the firmware, you must log into the extender’s user interface.
To begin with, log into the user interface using the login credentials. Now, go to ‘Management’ and click the ‘Upgrade’ option. Hereon, click the ‘Check for New Firmware’ option. Now, the extender will search for any available firmware. If there’s firmware available, you can click the ‘Upgrade Firmware’ option. Wait till the firmware upgrade is complete, once it is, the extender will restart. Now, this should fix the D-Link extender drops connection issue.
Reset the Extender
If none of these methods are working, you can reset the extender. Resetting the extender will fix all the internal glitches and bugs with the extender. You can reset the extender manually or via the web browser.
For the Manual Reset: Initially, press and hold the reset button using a sharp object. After 10 seconds, you can release the button and the reset will initiate. Now, the LED on the extender should turn red. Wait for 30 seconds, and then you can access the extender again.
For the Reset Via UI: First of all, log into the user interface of the extender. Now, from the ‘Management’ drop-down menu, go to the ‘System’ page. After that, tap the ‘Restore Default Settings’ option and confirm it by clicking ‘Ok’ on the notification.
When the reset is complete, you can reconfigure the extender as all the factory default settings are back. Now the D-Link extender disconnecting issue should be fixed as well.
Bottom Line
These are some methods you can use to fix the D-Link extender dropping connection issue. Now, the extender should be working fine. For any other issues, reach out to our team right now.
