Reset Dlink Wifi Extender

How To Reset Dlink Wifi Extender?

If you are using the internet at your place, you might have encountered issues with connecting to it at some point. The next you would have done is look for troubleshooting guides online to help you out. Restarting your device is one thing, and following all those troubleshooting methods is another, however, the Dlink wifi extender reset process is a one-stop solution to resume accessing the internet seamlessly.

When you reset the extender settings to factory default, the network configuration gets reset to the old setup. This means that you get an almost new device(apart from the hardware being old). Once you have reset the device, you can simply reconfigure the network settings to use the internet again. Now, if you were looking for a reliable information source to help you with the reset procedure, this blog is what you need to read.

Performing Factory Reset

Your D-Link range extender can be reset to default factory settings using two ways:

  • Hard RESET
  • Soft Dlink Wifi Extender RESET

Hard Reset Process

If you are looking for help with resetting the D-Link range extender, the hard reset process is the simplest method. You can start with locating the RESET button on your extender device as the first step. You can find it either on the bottom panel or the rear panel of your extender device. In some models, the button may be hidden inside a small hole, whereas, in other models, you will find it protruding with a RESET badging next to it. Once you have located the same, here are the steps you can follow:

  • Press and hold the RESET button for at least 5-6 seconds. You can either normally press the button or use a thin paper clip or a pin to do that. Some extender models may require pressing the RESET button for a longer duration. You can refer to the user manual of your device model to confirm the same.
  • When you see the power and status LEDs on the front panel flash altogether, release the RESET button. You will now see the extender reboot itself.
  • Make sure you don’t power off your extender during the reset process, or the hardware may get damaged.

Once your D-link range extender is back up and running, you can follow the basic d-link setup process to reconfigure the device.

Soft Dlink Wifi Extender Reset Method

The web-based settings management wizard can help you reset the device as well. However, you will need the admin details to log in to the same. If you are resetting your device just because you have forgotten the admin details, you can follow the HARD reset method. For other issues, simply follow the steps.

Before you begin, also check if you are connected to the device network using your computer or smartphone. This is to make sure that you can access the setup wizard online. Once you are ready, you can begin with the easy steps as mentioned:

  • Login to the Dlink extender setup wizard using one of the browsers on your computer or smartphone.
  • Once you are logged in, navigate to the “Device Administration” section on the same.
  • Select the “RESET device” option from the menu. Once you click on the button, you may be asked to enter the old password as well. Provide the required details and click on the Submit button.
  • Finally, click on the “Reset extender now” button and proceed.

The device reset process will now initiate and you will be logged off the device setup wizard. You can use the D-Link extender setup process to reconfigure the network settings and begin with accessing seamless internet once again.

Having trouble with the Dlink extender reset process? Reach out to the team now!

Leave a Comment

Your email address will not be published. Required fields are marked *