D-Link Smart Plug Not Connecting to Wifi?

A D-Link smart plug is a small power adapter that operates on WiFi. You can plug in the smart plug anywhere as long as you have a steady connection and manage your devices. For the smart plug to work efficiently, it requires a stable internet connection. So when the D-Link smart plug not connecting to WiFi, you need to troubleshoot the issue to get the best out of it.

If you are facing the same issue, don’t worry! In this blog, we’ll discuss the reasons for the Dlink smart plug not connecting to WiFi, along with its troubleshooting methods.

Why is the D-Link Smart Plug Not Connecting to WiFi?

The reasons for the D-Link smart plug not connecting to WiFi could be as follows:

The plug is out of the router’s range
Incorrect WiFi password
The router isn’t working correctly
Internal issues with the plug
Hardware damage

These are some common factors obstructing the plug from forming a connection with the WiFi.

Fix: D-Link Smart Plug Not Connecting to WiFi

To get the D-Link smart plug back on track, you need to eliminate the factors for the DLink smart plug not connecting to WiFi. Follow the D-Link smart plug troubleshooting below:

Inspect the Internet

Firstly, you must check the internet connection and ensure it’s not too slow.
Check the connection between the plug and the WiFi.
If there are some issues with the router, you may need to troubleshoot the router as well.
You can try power cycling the router or resetting it to eliminate the problems.
Reconnect the plug to the WiFi and check if it’s working then or not.

Check the WiFi Password

While setting up the plug, ensure you have entered the correct WiFi password.
If there’s a failure of connection between the plug and the WiFi, it won’t work.
Another reason is that you set a different password recently.
If this is the reason, you will need to reconnect the plug to the WiFi using the new password.

Check the Router Settings

You can check the router’s settings as it could be a reason.
Check if the router allows new devices to make a connection.
You need to enable this feature and reconnect the plug to the WiFi.
Make sure to check other settings and ensure there is nothing else preventing the plug from connecting to the WiFi.

WiFi Signal Strength

Check the strength of the signal of the router.
If the signal strength is low, the plug will not work efficiently.
You can check in from your ISP, as there could be an issue from their end.
If there is an issue from the ISP, you will have to wait till they fix the problem.

Update the App

You can update the app if you are unable to set up the plug accurately.
For a seamless setup, ensure you are using the app on Android version 0.4 or higher or on iOS version 0.7 or higher.
Ensure the app is always up-to-date to avoid any issues while using the smart plug.

Relocate the Smart Plug

The plug should be in the router’s range for a seamless connection.
If the plug is out of the router’s range, you can relocate it closer to the router.
While using the plug, ensure you are in the router’s range.

Reset and Reconnect the App

If the issue persists, you can reset the plug to eliminate the problems with the plug.
To begin with, find the reset button on the plug.
Now, press the button for some time.
After 10 seconds, you can release the button.
The LED light should be red, indicating the plug has reset.
Now, you can reconfigure the plug, as the reset will restore the factory default settings of the plug.

Check for Damage on the Plug

Check the plug for any damage.
If there is, you can either repair the plug or replace it.
You can also check the router for any damage.
You may need to replace the router as well if there is damage.

These are some troubleshooting ways for the D-Link smart plug not connecting to WiFi. If the issue persists, or there’s any other issue you are facing with your plug, reach out to our expert team right now!

FAQs

How to Setup a D-Link Smart Plug?

If you had to reset the smart plug then you need to reconfigure the plug. The steps for the D-Link smart plug setup are as follows:

Firstly, download the mydlink app from the play store or app store.
Secondly, open the app and create your account or log in if you already have one.
After that, plug the smart plug into an electrical outlet and wait till it comes up.
If it doesn’t, press the on/off button.
Thereafter, click on ‘Next’ on the app to proceed further.
When the LED lights up orange, click on ‘Next’ in the app.
Now, you need to press the WPS button on the router.
Following this press the WPS button on the side of the plug and wait for it to form a connection with the router.
The green LED will indicate the connection is successful.
Hereon, connect your device to the plug’s network by entering the pin code.
You can find the pin on the plug or the installation card.
Subsequently, choose ‘D-Link’ from the list and enter the WiFi password to connect the plug to the WiFi network.
Ensure to connect your device to the WiFi network, go to the app and tap on ‘Next’.
At last, the device will search for the smart plug and form a connection.

The D-link smart plug connection is successful. Now you can plug in any socket and manage your devices.

How to Connect a D-Link Smart Plug to WiFi?

You can easily connect a D-Link smart plug to WiFi. The steps are as follows:

Initially, install the mydlink Home app and set up the plug using the above instructions.
After that, install the Amazon Alexa app, log in with your account details, and install the Amazon Echo product.
Now you just need to enable the mydlink Home Skill on the Alexa app.
This will allow you to access the smart plug through voice command.

This is how you can connect a D-Link smart plug to WiFi.

Does D-Link Smart Plug Work Without WiFi?

No, the D-Link smart cannot work without WiFi. To make the most out of your plug, you need to connect it to a stable WiFi network.

How Does the D-Link Smart Plug Work?

The smart plug functions with WiFi. You can manage your devices from this device. You just need to connect it to a strong WiFi connection and then you can control your devices from anywhere.

Why There is No LED When I Plug in my Smart Plug?

If the LED doesn’t light up after plugging in the smart plug, then you can try plugging it into a different socket. Without a stable source of power, the plug won’t work.