Looking for a high-performing extender with the best technologies? D-Link DAP1320 is the one for you. It comes with several models to fulfill your requirements. Being budget-friendly is the best thing about the DAP1320. If you are looking for a best-performing extender with larger coverage, D-Link DAP1320 is the best option for you. It becomes easy to access your device remotely from any part of your home. You can use it with the brand of any router as it is universal. It supports the WPA, WPA2, and WPs for better password security. You can easily do the D-Link DAP 1320 Setup with some simple steps.
Here, we will know about dlink dap 1320 installation and setup. If you have some trouble with your device, you can reset it easily with the steps provided here. Let’s begin with the D-link setup and login process.
D-Link DAP-1320 Extender Login
You can log in to your D-Link DAP1320 extender using easy steps. However, before you do that, you will need to access the extender’s local network. This is important as the web login page is based on the local device server. You can connect your devices/computers to the local extender network in two ways:
Wired Connection and Wireless Connection.
While you can always use ethernet cables to connect your extender to your computer, you can use the WiFi feature of your devices and the extender to form a connection. Once connected, you’ll be able to see the status of the connection on the extender(in the form of LAN/WLAN LED) and the computer/device(network status will show as connected).
Accessing the D-Link DAP1320 login page
- Open a web browser on your connected computer or device and type in the default web address http://dlinkap.local in the web address bar of the same.
- Press Enter and you will be redirected to the D-Link DAP-1320 login page.
- Type in the default admin credentials in the respective fields and click on the Login button.
You are now logged in to the D-Link Extender.
Instructions to do the D-Link DAP 1320 Setup
If you are in search of a high-performing extender with a larger coverage area you have to do the D-Link DAP 1320 Setup and log in. You can do it easily with the stepwise instructions given below.
Using the WPS button:
- First, you have to connect your DAP-1320 to the power source and push the power button.
- You will see the LED lights blinking.
- Now, you have to press the WPS button on your device and then press and hold the WPS button on your DAP-1320 till it blinks green light.
- Release the button when you see the solid green light.
- Now, place your extender in between your router and the desired area. Make sure it’s closer to your router.
Through Manual process:
- You have to put your device to the wall outlet and see the light blinking orange.
- Now, joint your device to your wireless system and open the default browser.
- Enter the default web address on the address bar and load the http //dlinkap.local login page.
- On the login page, enter the dap 1320 admin password and username and click on the login button.
- On the setup page, select the manual method.
- Now, create the wireless network name and password. You have to click on the Next button.
- After confirming the settings, you have to click on the Save button.
Once you are done with the dlink dap 1320 installation and configuration, you will be able to access your device easily and can control it anytime you want. If you encounter trouble while trying setup & login process, you can resolve them with some simple troubleshooting steps. If you still can’t resolve the issue, you have to reset your device.
How to connect to D-Link DAP-1320?
Once you have configured the network settings on your D-link DAP1320 extender, you can use the new network settings to connect to the network. You can either connect to the D-Link DAP1320 using a wired connection or a wireless connection. Here is some information on both ways:
Wired Connection
- Plug one end of an ethernet cable into the LAN port on your D-Link extender and the other end into the ethernet port on your computer.
- You will now see the LAN LED on your extender glow up. Also, the network status on the connected computer will turn to Connected.
Wireless Connection
- Ensure that the Wireless is enabled on your D-Link DAP-1320 extender. Now, enable the WiFi on your wireless device as well.
- Open the WiFi networks window and search for the SSID of your D-Link DAP-1320 Extender. Once located, click on it and enter the password to connect to it.
- Once connected, you will see the WiFi signal icon on the top of your smartphone’s screen. Also, the WLAN LED on your extender will light up.
Why Dlink DAP-1330 Won’t Connect?
If you are unable to connect to the D-Link DAP1320 extender’s network, check the password that you are using. Ensure that you are typing the correct sequence of the letters, numbers, and symbols in the password. Also, follow the case order to ensure easy connectivity with the device.
Furthermore, you can check if there’s a MAC Filter enabled on your extender. If so, it will only allow a specific list of devices to connect to the network. Try checking the network settings on your D-link DAP1320 extender and then checking if your D-Link DAP-1320 can connect.
Finally, see if there is a limit of devices applicable when connecting to the extender’s network. If so, remove the limit or disconnect any wireless devices that are not being used currently. Once that is done, you can check if you can now connect to the extender network.
How to Access D-Link DAP-320 Wifi Extender Admin Password?
The default admin credentials for your D-Link DAP-1320 WiFi Extender can be found on the product label of the device. However, if you have changed the same, you will need to login into the setup wizard. Once you log in to the setup wizard, head to the Administration section of the setup wizard and you will see the admin password details.
D-Link DAP-1320 Firmware Update
Though every extender and router is programmed to make the latest firmware update on its own, you can manually update the firmware using the setup wizard.
- Initially, log in to the setup wizard and head to the Administration Section.
- Here, click on the Firmware Updates option and if available, you’ll see a prompt to update the same. Click on the Update now and the firmware update process will begin.
- Once the firmware update is over, the extender will reboot itself. You can then reset the extender to factory settings and begin using the extender as usual.
How to Reset your D-Link DAP 1320?
Have you tried every possible way and cannot resolve the issue related to your D-Link device? Don’t worry! You can do the d link dap 1320 reset easily with the steps provided here. Check out the instructions below.
- Plugin your DAP-1320 to the power source. Wait till you see the lights turning green.
- Now, locate the reset button at the bottom of your device.
- Use a paper clip to press the button and hold it for 10 seconds and then release it.
- Your device will be done with the reset process and you have to configure it again.
With that, you are all done resetting your device, you can log in to your D-link device using the http //dlinkap.local login instructions. Then, do the setup with the steps mentioned above.
Conclusion
With the information provided here, you will be able to do the D-Link DAP 1320 Setup without any problem and enjoy your uninterrupted internet with high internet speed. If you have any queries or want to know more about your D-Link device, you can call us on our toll-free number and get help from one of our experts. They will gladly assist you.