D-Link DAP-1520 Setup Process

D-Link DAP-1520 range extender can be a powerful supplement to your existing router signals. If you have recently purchased a new D-Link DAP-1520 extender, learning how to settings up is important. This will help you configure the network settings and have access to seamless internet. This blog will walk you through the complete steps to access the D-Link DAP-1520 Setup wizard and configure your network easily.

How to Setup D-Link DAP-1520 Wifi Extender?

Your D-Link DAP1520 wifi extender can be configured easily using the web setup wizard. Alternatively, you can also use the WPS setup method to configure the network and connect your extender to the main router network at your home.

While the web setup method can be lengthy, the WPS setup method can help you set up a network with a press of a button. Nevertheless, you will find complete information on how to set up your D-Link extender via both methods.

Setup Via Web Browser

Before you begin with the setup process, there are some equipment and details you’ll need handy. Make sure you have the following:

  • Ethernet cable(s)
  • Smartphone/computer
  • Default web address/IP address
  • Admin extender username and password
  • Main router network credentials

For the admin username and password details, you can refer to the details on the product label. While the default web address or IP address you can use is https://dlinkap.local and https://192.168.0.1.

SETUP VIA WEB BROWSER

Making the arrangements

Once you have the details and the required equipment, you can proceed with the setup process. Here are some steps you can follow:

  • Connect your range extender to a power outlet, preferably near the main router. Switch on the power supply and allow the extender to power on itself. Also, make sure the router is functioning as well.
  • Open your computer or smartphone and go to the wireless network settings. Look for the extender network SSID in the available networks section. Click on the name once you see it and then click on the Connect button.
  • If you wish to connect your devices using a wired connection, use an ethernet cable to connect your extender to the computer. The computer will detect the network connection and prompt you with a notification as well.
D-Link Extender Login

Accessing the D-link Dap-1520 extender login page

  • Launch a web browser and in the address bar, type the default web address https://www.dlinkap.local and press Enter. If the web address doesn’t generate any results, you can also use the IP address https://192.168.0.1.
  • You will be redirected to the D-Link extender login wizard. You will see the username and the password text fields. Use the admin credentials including the username and the password and click on the login button.
  • Once the login wizard has verified the details, you’ll be redirected to the main D-link DAP-1520 extender setup wizard.

How To configure d-link dap-1520?

As soon as the setup wizard appears, it will scan for the available router networks/ host networks to connect to. A list of the same will be shown on the screen. Locate the one that belongs to your main router. If you do not see the name of your router network in the list, make sure the wireless option is enabled and try again.

  • Once the router network name becomes visible, click on it and then type in the network password in the text field available. Next, click on the Join button.
  • The setup wizard will verify the network credentials and accordingly redirect you to the extender configuration page. Here, you can assign a new SSID and strong password for your extender network. Finally, select the network encryption type and click on the Next button.
  • You will now be prompted to configure the admin credentials. Type in a new admin username and password if you wish to and click on the Save button.
  • As the last step, you will reach the settings review page. You will see a summary of the settings you have configured. Review the same and click on the Finish button.

Note: If you have a dual-band extender and router, you will also need to connect to the 5GHz network band of your router using the respective credentials.

The D-Link DAP-1520 extender setup is now complete and you can connect your wireless-enabled devices to the freshly configured network. For questions or more information, reach out to the team at our end.

Setup using the WPS Button

WPS or WiFi Protected Setup is the password-free connection feature for your devices. It can help form a secure network between two devices. Modern networking devices like your D-Link DAP1520 wifi extender arrive with a WPS feature to support such connections. If your main router supports the WPS feature too, you can follow these simple steps to configure the network:

  • Locate the WPS button on your range extender and the router. Power on both of your devices and bring them close to each other.
  • Once the devices are ready, press the WPS button on your D-Link DAP1520 for a brief span of time till you see the WPS LED blink.
  • This indicates that the range extender is now looking for host devices to connect.
  • Within 60 seconds, press and hold the WPS button on your main router. Once the WPS LED on your range extender turns solid, release the button.
SETUP USING THE WPS BUTTON

The WPS connection is now successful and you can access the new extender network easily using your devices. Connect to the same using the main router’s network password only.

The D-Link DAP-1520 extender setup is now complete and you can connect your wireless-enabled devices to the freshly configured network.

How to Update D-Link DAP-1520 Wifi Extender?

Updating the firmware version of your D-Link WiFi extender is important as it helps keep the device performance steady and at par with your networking requirements. Firmware updates are released regularly by manufacturers to aid in feature enhancements and bug fixes. If left pending, you might miss out on major feature upgrades and fall prey to information safety issues as well.

You can update your D-Link DAp-1520 WiFi extender firmware using some simple steps:

  • Log in to the D-Link extender setup wizard using the dlinkap.local web address.
  • Head to the Management button on the top and tap on the Upgrade option from the drop-down menu.
  • Click on the “Check for New Firmware” button on the screen.
  • If there’s a firmware update available, you can click on the Update Firmware
  • The firmware update process will now begin. Allow the process to complete and the extender will restart on its own.

How to Reset D-Link DAP-1520 Extender?

HOW TO RESET D-LINK DAP-1520 EXTENDER

Resetting your D-Link extender can help you avoid issues related to the setup, login, and more. It clears up your device’s settings and puts it back in the factory state. You can modify the settings for your D-Link extender easily using the general setup process. To reset your extender, here are some instructions you can follow:

  • Locate the RESET button on your D-link extender.
  • Press and hold it for about 10 seconds or until the LEDs on the extender flash together.
  • Release the button once that happens, and allow the device to reboot.

Once your extender is up and running again, you can proceed with the network setup afresh.

Have more questions on D-Link DAP1520 Extender Setup? Connect with us now!