D-LINK DAP 1650 Wifi Range Extender Setup

d-link dap 1650 wifi range extender

Struggling with weak and dead wifi spots at your place? The best solution to get rid of unstable wireless connectivity is D-Link DAP 1650 Wifi Range Extender setup. D-Link DAP 1650 is an ideal range extender to boost the signal strength and improve the coverage of any wireless network. If you are a new buyer of dlink extender then this D-Link DAP 1650 Wifi Range Extender setup guide will answer all your queries. D-Link Dap 1650 extender extends your existing wifi range and also troubleshoots slow or weak wifi signal issue. You can perform the d-link DAP1650 setup using the web browser method via dlinkap.local local address or wirelessly using the WPS button. We are discussing both the methods on this D-link DAP 1650 setup guide.

How to set up d-link DAP 1650 Wifi RAnge extender?

You’ll need the following things for d-link DAP 1650 setup:

A fully configured Wi-Fi router
A computer or mobile phone
An existing wifi network’s SSID and passkey
A Working internet connection
D-Link wifi extender

What is D-Link DAP-1650 Extender Default Password?

The default password details for your -Link DAP1650 extender can be located on the product manual or on the label you see at the bottom. The same is always listed along with other details related to the default settings. You can always access the following details to be used as the default password for your D-link DAP1650 extender:

Password: admin

Web-Browser Method

First, you need to supply power to dlink dap1650 extender. Thereafter, you need to connect the dlink dap 1650 extender to your computer with an Ethernet cable or wirelessly.

Next, open any installed and updated internet browser and type dlinkap.local in its address bar. You’ll get into d-link DAP 1650 login page.
Enter the dlink extender login information in its required fields and click on the ‘login’ button. This will redirect you to the D-Link DAP 1650 Wifi Range Extender setup page.
The setup wizard will now scan for the available wireless networks. You will need to recognize your home network and enter its wireless passkey in order to connect to it.
Now, you will be able to configure the further settings of the dlink wifi extender. If you want to copy the wireless settings of the router, click on ‘keep the same settings’ otherwise you can provide the new details.
Finally, your D-Link DAP 1650 Wifi Range Extender setup process is completed.

WPS method

In order to fix the dlinkap.local not working error, you should try out the following steps.

Place and plug your dlink dap 1650 extender in the same where your router is kept. Connect it to the power source.
Make sure your router also includes a WPS button. Next, you will need to press the WPS button on your dlink wifi extender.
After a while, press the WPS button on the wireless router. Wait for a while.
You will see the internet light on the dlink extender. It means your extender is successfully connected to the wireless router.
Finally, your d-link DAP 1650 setup and installation is done.

D-Link DAP-1650 Setup as Access Point Mode

Once you are logged in to the D-Link DAP1650 setup wizard, select Setup and head to the Wireless Setup menu. Here, select the Wireless Mode as Access Point from the drop-down menu and follow the instructions.

You will be required to select a radio schedule from the existing ones or you can also create a new one by clicking on the New Schedule
Check the box next to Enable Wireless to allow the 2.4GHz band to be functional. If you leave the check box unchecked, it will disable all the wireless functions.
Now, specify a network SSID for your 2.4GHz network.
Select one of the wireless signal modes from the 11 Mode menu. Once done, you can enable the Auto Channel Scan option by checking the respective check box.
Select the Transmission rate as best and then select the Auto option for the Channel Width
Set the visibility stats as Visible and select the latest security mode for the wireless security mode.
Once done, click on the Save Settings button at the bottom of the page.

How to fix D-Link DAP-1650 Extender no internet issue?

Check router settings

If you’ve made sure to do the correct configuration and setup of the D-Link DAP-1650 extender, but “no internet” is still being reported, you may be in the presence of a malfunctioning router. Particularly, the problem could occur when the router is inoperable or has a problem with its firmware. This means that you must look for the router’s firmware. This is because firmware updates include new features that boost performance.

You can download updated firmware for your router on the official website of the manufacturer of your router. Once the firmware update has been installed on the router the internet should be working smoothly. However, if the firmware update installation doesn’t perform, we suggest you switch the router (you need to purchase the most current router, of course).

Delete Cache & Cookies

If there is no error on the internet present when using the extender’s Wi-Fi, it is possible that the device has been blocked by cookies and cache. Users can access the settings on the device to clear out Cookies and Cache. The specific instructions differ based on the device you’re using with the extender from D-Link DAP-1650. For more information, refer to the product manual for how to clear the cookies and cache.

Check Router Distance

The weak internet signal could be the reason that the extender of D-Link DAP-1650 shows an error in the internet. If that is the situation, it is important to look at how far between your extender as well as the router’s Wi-Fi signal is. This means that you should minimize the distance between the two devices to ensure that internet signals are more powerful. When Internet signals have been strong enough, issues with the internet cannot be rectified using the D-Link DAP-1650.

Inspect Ethernet Cables

The interruption of wireless signals could result in internet connectivity problems. Therefore, if you’re trying to resolve the issue of no internet then we recommend that you utilize ethernet cables. In particular, it is recommended to connect the D-Link DAP-1650 extender as well as the Wi-Fi router using an Ethernet cable since it increases the transmission of signals. Furthermore, be sure that the Ethernet cable is securely connected and does not have any looseness.

D-Link DAP-1650 Firmware Update

Launch a web browser and use http://dlinkap.local to log in to your D-link extender.
Type in the username and password details in their respective fields and click on the Login
On the next screen, click the “Management” tab from the right-hand side. Select “Upgrade” from the drop-down list.
Under the section on Firmware Information in the next window, click on “Check” and then click the “Check for new firmware” button.
Your device will be able to detect new firmware versions. If available, hit the “Upgrade Firmware” button after going through the specifics.
You can also upgrade the firmware file yourself. To do this it is necessary to download the latest firmware from the D-Link technical support site. After that, in this “Upgrade” window, click on the “Select File” button under the Upgrade Manually section.
Choose from the .bin firmware file you downloaded. Click the “Upload” button. When the firmware update is completed the extender will reboot itself. Log in to the device once more after the device has rebooted.

Why is D-Link DAP1650 Flashing/Blinking Orange Light?

A blinking orange light on your D-Link DAP1650 extender indicates that it is receiving the signals but they aren’t sufficient enough. To resolve the issue, you can move the extender closer to the main router. This will put the extender within the required signal coverage area and you can proceed with using the internet seamlessly.

D-Link DAP-1650 Factory Reset

Factory RESET on your D-Link DAP1650 means you are resetting it to the default settings. You can do that using the push-button present on the rear or the side panel in some cases. Once you are ready to reset your extender, here are some steps you can follow:

Find the RESET button located on the left side of the device’s extender. Make use of a small device to hold and press that.
Press the button for about 10 seconds, until an LED in the panel on the top begins to blink.
Release the RESET button now, and wait for the extender to reboot to its factory default settings.