D-Link DAP-1610 setup - the process
Range extenders have come as a great addition to the existing networking technology. Users would not have any alternative than purchasing two separate routers for extending their network coverage. But now that extenders like D-Link DAP-1610 are here, you can rely on them for seamless internet access. If you have recently purchased a new D-Link extender for your home, it becomes important for you to learn the D-Link DAP-1610 Setup process. Learning how to set things up and configure the internet settings will help you ensure smooth device connectivity and more. This blog will walk you through the steps for the D-Link DAP-1610 setup process.
Beginning with the D-Link DAP-1610 setup
Before you begin with the D-Link extender setup process, you’ll need to collect some details including the default web address/IP address for your extender, the default login credentials paired with the details for your main home router. Router details that you would need are the login credentials like the network name and the password and more. Once you have these details, you can proceed with the D-Link DAP1610 setup process conveniently. Additionally, you would also require some equipment like-
- Ethernet cable(s)
- Broadband modem
- Computer/Smartphone
- Power supply
Once you have these things, you can prepare your extender for the setup. Here are the steps you can follow:
- Connect the range extender to the power outlet near the main router. Power on your range extender and turn on the power supply. Notice the power LED blink and then go solid.
Accessing the D-Link login page
The online settings can be configured using the manual steps online. You can access the same as follows:
- Open the Network and Sharing center on your smartphone/computer and look for the extender network name in the available networks menu. Once you see the same, select the network name and then click on the Connect button to connect to the network.
- Once your device is connected to the extender network, launch a web browser and in the address bar, type the default web address https://www.dlinkap.local and press Enter. This will redirect you to the default D-Link extender login page.
- If the login web address doesn’t work, you can also use the IP address https://192.168.0.1 instead. Both these addresses will redirect you to the same login page, provided, the IP address has not been changed. If changed, you can always obtain the correct IP address details from the ‘Command Prompt’ application. To know these details, open the Run dialog box using the ‘Windows+R’ combination and then in the textfield, type ‘cmd’ and press ‘Enter.’
- The Command Prompt will open. Type ‘ipconfig’ in the search bar and then press ‘Enter’ again. You will now see the internet connection details which you can refer to. Use these IP address details to access the D-Link extender login page now.
Save the settings and close the setup wizard and you may now start using the internet using your D-Link range extender at the dead corners of your home or office seamlessly. For more help on D-Link extender setup and login process, you may reach out to the team at our end 24*7.
Configuring the network settings online
D-Link DAP-1610 Setup: Manual Method
The manual setup means the D-Link DAP-1610 Wifi Extender Setup using the web-based URL dlinkap.local or you can also use the app. Here, we are focusing on web browser method. In order to configure the D-Link DAP-1610 wifi extender follow the given set of instructions in order.
- Start by power cycling the home or the master router.
- The next step is to keep the dlink wifi range extender in the network range of your home router and power it through an electrical socket.
- Use an ethernet cable to forge the connection between the dlink wifi extender and an operating device (laptop/ computer)
- Ensure your laptop or computer is only connected to the dlink extender’s network.
D-Link DAP-1610 Login
- After that open the web browser and run the URL dlinkap.local in the search bar.
- Next to which, you have to enter the default web login credentials of the dlink extender (username and password both are ‘admin’)
- Click on the login button and take yourself to the setup wizard.
Configure Network SSIDs of D-Link DAP-1610 Wifi Extender Setup
- Further on the setup wizard page, take yourself to the Setup button. Then, click on the button called Next.
- Select your home network and enter its passphrase. By this, your dlink extender is connected to your home network.
- Here, set the network name and password on both bands.
- End by saving the settings you just made.
The D-Link DAP1610 setup process using the manual method is now complete. If you would need more details on the setup process, you can always reach out to the team at our end for help.
