D-Link Wireless Extender Password Setup | Dlink Wireless Setup Wizard

D-link Wireless Extender Password Setup

This guide will take you step-by-step to set up your dlink extender password. Whether you want to configure the dlink extender admin or wireless password, you need to log into the d-link extender setup page. All you need to do is connect the extender to a computer device. Use the default gateway of your extender which is dlinkap.local to log into the web interface of your device. Securing your range extender passwords is important for your network security. Follow the d-link wireless extender setup password instructions given in this post.

Setting Up the Admin Password Of the Dlink Range Extender

You need to use a computer system or any device that is connected to your home network to perform the dlink wireless password setup process.
It is advised to connect your PC to the extender using a wired cable rather than a wireless connection.
Now, open a web browser on the connected device and type https://dlinkap.local the default web address in the address field.
If the default gateway doesn’t open the d-link wireless extender setup page then you can use
192.168.0.50 the dlink wifi extender IP address.
When a login screen appears, enter admin in the username field and leave the password field blank. Click on the login button.
On the web-configuration page, click on the Maintenance and then select the Admin tab.
Now, enter a new password in the password field. Re-enter the password in the Verify Password field.
Click on the Apply tab to save the new admin password.

Follow the Dlink Wireless Password Setup Instructions

Visit the https://dlinkap.local login page on a computer system.
Log in with the Dlink extender login credentials.
If you can’t log into your extender with these credentials, perform the dlink extender password reset.
Once logged in, go to the Wireless settings.
You can click on the Setup tab and then select the Wireless Settings option.
Next, select the Security Mode option to choose the best security method.
It is advised to select the WPA2/WPA-PSK as the security mode.
Now, click on the Passphrase tab and enter a new Wi-Fi password.
In the Verify Password field, type the Wi-Fi password again.
Once done, click on the Save button to apply the changes.
When you change the wireless password, all your connected devices will be disconnected.
Now, you need to connect to the home network with a new Wi-Fi password.

Conclusion

So, these were the d-link wireless extender setup password instructions. If you need further assistance with the dlink extender setup and login, you can contact our technical team through a toll-free number. Our team of experts is available 24*7 to resolve your queries.